COVID-19 Shipping delays may occur! All Tools Warehouse stores remain open - Read more!

Fluke FLUKE-1587/MDT FC Insulation Advanced Motor & Driver Troubleshooting Multimeter Kit

by Fluke
FREE Shipping over $99*
Exclusions apply – See Shipping Policy
$2,519.00

Buy Now. Pay Later

Estimated Dispatch Time: 3-10 days
i

Contact us for an exact ETA. Subject to availability - T/C's apply

Features:

  • The Fluke 1587 FC 2-in-1 Insulation DMM
    • Pl/DAR measurements with TrendIt™ graphs
    • Memory storage through Fluke Connect Measurements app
    • Temperature Compensation through Fluke Connect Measurements app
    • VFD low-pass filter for accurate motor drive measurements
    • Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
    • Insulation test voltages 500 V, 1000 V
    • Insulation test: 0.01 MΩ to 2.0 GΩ
    • Insulation test: 0.1 MΩ to 600 MΩ
    • Auto-discharge of capacitive voltage
    • Insulation test smoothing reading
    • Frequency / Capacitance / Diode test / Temperature
    • Min/Max / AC/DC Voltage / DC Millivolts / AC/DC Milliamps
    • Resistance (0.1 Ω to 50 MΩ) / Continuity / Auto power off
    • Three-year warranty / Remote probe, test leads, alligator clips, K-type thermocouple, hard case
  • Fluke i400 AC Current Clamp
    • Use with your Fluke 1587 FC to measure 1A AC to 400 A AC
    • 1 mA/Amp output guarantees easy reading
    • CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection
    • Specially designed to offer maximum utility in a very compact shape
    • Maximum conductor: Ø 32 mm
    • 1 year warranty
  • Fluke 9040 Phase Rotation Indicator
    • Large display to easily determine field rotation and phase sequence
    • Indication for all three phases
    • CAT III 600 V overvoltage rating
    • 2 year warranty

Specifications:

  • Fluke 1587 FC Insulation Multimeter
    • AC voltage measurement
      • 600.0 mV
        • Resolution: 0.1 mV
        • Accuracy: 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
        • Accuracy: 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)
      • 6.000 V
        • Resolution: 0.001 V
        • Accuracy: 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
        • Accuracy: 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)
      • 60.00 V
        • Resolution: 0.01 V
        • Accuracy: 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
        • Accuracy: 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)
      • 600.0 V
        • Resolution 0.1 V
        • Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
        • Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)¹
      • 1000 V
        • Resolution 1 V
        • Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(2% + 3)
        • Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) ±(2% + 3)¹
    • Low-Pass Filter Voltage 
      • 600.0 mV
        • Resolution 0.1 mV
        • Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
        • Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3)
      • 6.000 V
        • Resolution 0.001 V
        • Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
        • Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3)
      • 60.00 V
        • Resolution 0.01 V
        • Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
        • Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3)
      • 600.0 V
        • Resolution 0.1 V
        • Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(1% + 3)
        • Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3)
      • 1000 V
        • Resolution 1 V
        • Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) ±(2% + 3)
        • Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) +(2% + 3), -(6% - 3)
    • DC Voltage Measurement
      • 6.000 V dc 0.001 V ±(0.09% + 2)
        • Resolution: 0.001 V
        • Accuracy ±(% of Rdg + Counts): ±(0.09% + 2)
      • 60.00 V dc 0.01 V ±(0.09% + 2)
        • Resolution: 0.01 V
        • Accuracy ±(% of Rdg + Counts): ±(0.09% + 2)
      • 600.0 V dc 0.1 V ±(0.09% + 2)
        • Resolution: 0.1 V
        • Accuracy ±(% of Rdg + Counts): ±(0.09% + 2)
      • 1000 V dc 1 V ±(0.09% + 2)
        • Resolution: 1 V
        • Accuracy ±(% of Rdg + Counts): ±(0.09% + 2)
      • Input impedance: 10 MΩ (nominal), <100 pF
      • Normal mode rejection ratio: >60 dB @ 50 Hz or 60 Hz
      • Common mode rejection ratio: >120 dB @ dc, 50 Hz or 60 Hz (1 k unbalance)
      • Accuracies apply to: ± 100% of range
    • DC Millivolts Measurement
      • Range / Resolution / Accuracy ±(% of Rdg + Counts)
        • 600.0 mVdc / 0.1 mV / ±(0.1% + 1)
    • DC and AC Current Measurement
      • AC 45 Hz to 1000 Hz
        • Range: 400 mA
        • Resolution: 0.1 mA
        • Accuracy: ±(% of Rdg+Counts) ±(1.5% + 2)¹
        • Burden voltage: (Typical) 2 mV/mA
        • Range: 60 mA
        • Resolution: 0.01 mA
        • Accuracy: ±(% of Rdg+Counts) ±(1.5% + 2)¹
        • Burden voltage (Typical): 2 mV/mA
    • DC
      • Range: 400 mA
      • Resolution: 0.1 mA
      • Accuracy: ±(% of Rdg+Counts) ±(0.2% + 2)
      • Burden voltage (Typical): 2 mV/mA
      • Range: 60 mA
      • Resolution: 0.01 mA
      • Accuracy: ±(% of Rdg+Counts) ±(0.2% + 2)
      • Burden voltage (Typical): 2 mV/mA
      • Overload: 600 mA for 2 minutes maximum
      • Fuse protection for mA input: 0.44 mA, 1000 V, IR 10 kA
      • AC conversion: Inputs are ac-coupled and calibrated to the rms value of sine wave input
    • Ohms Measurement
      • Range / Resolution / Accuracy +(% of Rdg+Counts)¹
        • 600.0 Ω /  0.1 Ω / ±(0.9% + 2)
        • 6.000 kΩ / 0.001 kΩ / ±(0.9% + 2)
        • 60.00 kΩ / 0.01 kΩ / ±(0.9% + 2)
        • 600.0 kΩ / 0.1 KΩ / ±(0.9% + 2)
        • 6.000 MΩ / 0.001 MΩ / ±(0.9% + 2)
        • 50.0 MΩ ² / 0.01 MΩ / ±(1.5% + 3)
      • Overload protection: 1000 V rms or dc
      • Open circuit test voltage: <8.0 V dc
      • Short circuit current: <1.1 mA
    • Diode Test
      • Diode test indication: Display voltage drop: 0.6 V at1.0 mA nominal test current:
      • Accuracy: ±(2% + 3)
    • Continuity Test
      • Continuity indication: Continuous audible tone for testresistance below 25 Ω and off above 100 Ω. Maximum Reading; 1000 Ω
      • Open circuit voltage: <8.0 V
      • Short circuit current: 1.0 mA typical
      • Overload protection: 1000 V rms
      • Response time: >1 m sec
    • Frequency Measurement
      • Range / Resolution / Accuracy ±(% of Rdg+Counts)
      • 99.99 Hz / 0.01 Hz / ±(0.1% + 1)
      • 999.9 Hz / 0.1 Hz / ±(0.1% + 1)
      • 9.999 kHz / 0.001 kHz / ±(0.1% + 1)
      • 99.99 kHz / 0.01 kHz / ±(0.1% + 1)
    • Frequency Counter Sensitivity
      • 600.0 mV ac
        • V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz: 100.0 mV
        • V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz: 150.0 mV
        • DC Trigger Levels¹ to 20 kHz²: NA
      • 6.0 V
        • V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz 1.0 V
        • V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz 1.5 V
        • DC Trigger Levels¹ to 20 kHz² -400.0 mV and 2.5 V
      • 60.0 V
        • V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz 10.0 V
        • V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz 36.0 V
        • DC Trigger Levels¹ to 20 kHz² 1.2 V and 4.0 V
      • 600.0 V
        • V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz 100.0 V
        • V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz -
        • DC Trigger Levels¹ to 20 kHz² 12.0 V and 40.0 V
      • 1000.0 V
        • V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz 300.0 V
        • V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz -
        • DC Trigger Levels¹ to 20 kHz² 12.0 V and 40.0 V
    • Capacitance
      • Range / Resolution / Accuracy ±(% of Rdg+Counts)
      • 1000 nF / 1 nF / ±(1.2% + 2)
      • 10.00 μF / 0.01 μF / ±(1.2% + 2)
      • 100.0 μF / 0.1 μF / ±(1.2% ±90 counts)
      • 9999 μF / 1 μF / ±(1.2% ±90 counts)
    • Temperature Measurement
      • Range / Resolution / Accuracy ±(% of Rdg+Counts)¹
      • -40 ° C to 537 ° C / 0.1 °C / ±(1% + 10 counts)
      • -40 ° F to 998 ° F / 0.1 °F / ±(1% + 18 counts)
    • Insulation Specifications
      • Measurement range: 0.01 MΩ to 2 GΩ
      • Test voltages: 50, 100, 250, 500, 1000 V
      • Test voltage accuracy: +20%, -0%
      • Short-circuit test current: 1 mA nominal
      • Auto discharge: Discharge time <0.5 second for C = 1 μF or less
      • Live circuit detection: Inhibit test if terminal voltage > 30 V prior to initialization of test
      • Maximum capacitive load: Operable with up to 1 μF load
    • Output Voltage
      • 50 V (0% to +20%)
        • Display range: 0.01 to 6.00 MΩ
        • Resolution: 0.01 MΩ
        • Test current: 1 mA @ 50 kΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(3% + 5 counts)
        • Display range: 6.0 to 50.0 MΩ
        • Resolution: 0.1 MΩ
        • Test current: 1 mA @ 50 kΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(3% + 5 counts)
      • 100 V (0% to +20%)
        • Display range: 0.01 to 6.00 MΩ
        • Resolution: 0.01 MΩ
        • Test current: 1 mA @ 100 kΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(3% + 5 counts)
        • Display range: 6.0 to 60.0 MΩ
        • Resolution: 0.1 MΩ
        • Test current: 1 mA @ 100 kΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(3% + 5 counts)
        • Display range: 60 to 100 MΩ
        • Resolution: 1 MΩ
        • Test current: 1 mA @ 100 kΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(3% + 5 counts)
      • 250 V (0% to +20%)
        • Display range: 0.1 to 60.0 MΩ
        • Resolution: 0.1 MΩ
        • Test current: 1 mA @ 250 kΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(1.5% + 5 counts)
        • Display range: 60 to 250 MΩ
        • Resolution: 1 MΩ
        • Test current: 1 mA @ 250 kΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(1.5% + 5 counts)
      • 500 V (0% to +20%)
        • Display range: 0.1 to 60.0 MΩ
        • Resolution: 0.1 MΩ
        • Test current: 1 mA @ 500 kΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(1.5% + 5 counts)
        • Display range: 60 to 500 MΩ
        • Resolution: 1 MΩ
        • Test current: 1 mA @ 500 kΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(1.5% + 5 counts)
      • 1000 V (0% to +20%)
        • Display range: 0.1 to 60.0 MΩ
        • Resolution: 0.1 MΩ
        • Test current: 1 mA @ 1 MΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(1.5% + 5 counts)
        • Display range: 60 to 600 MΩ
        • Resolution: 1 MΩ
        • Test current: 1 mA @ 1 MΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(1.5% + 5 counts)
        • Display range: 0.6 to 2.0 GΩ
        • Resolution: 100 MΩ
        • Test current: 1 mA @ 1 MΩ
        • Resistance accuracy: ±(% of Rdg + Counts) ±(10% + 3 counts)
    • Maximum voltage: applied to any terminal and common 1000 V
    • Storage temperature: -40 °C to 60 °C (-40 °F to 140 °F)
    • Operating temperature: -20 °C to 55 °C (-4 °F to 131 °F)
    • Temperature coefficient: 0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F)
    • Relative humidity
      • Noncondensing
      • 0% to 95% @ 10 °C to 30 °C (50 °F to 86 °F)
      • 0% to 75% @ 30 °C to 40 °C (86 °F to 104 °F)
      • 0% to 40% @ 40 °C to 55 °C (104 °F to 131 °F)
    • Vibration: Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
    • Radio frequency communication: 2.4 GHz ISM Band
    • Radio frequency certification: FCC: T68-FBLE, IC: 6627A-FBLE
    • Electromagnetic Compatibility
      • International
        • IEC 61326-1:Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A
        • Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
        • Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.
        • Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected.
      • Korea (KCC)
        • Class A Equipment (Industrial Broadcasting & Communication Equipment)
        • Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
      • USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
      • Enclosure protection: IEC 60529: IP40 (non-operating)
    • Safety
      • IEC 61010-1: Pollution Degree 2
      • IEC 61010-2-033: CAT IV 600 V / CAT III 1000 V
      • Batteries: Four AA batteries (NEDA 15A or IEC LR6)
      • Battery life: Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
      • Size: (H x W x L) 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)
      • Weight: 550 g (1.2 lb)
      • Altitude Operating: 2000 m
      • Storage: 12,000 m
      • Over-range capability: 110% of range except for capacitance which is 100%
      • Frequency overload protection: <107 V Hz
      • Fuse protection for mA: input 0.44A, 1000 V, IR 10 kA
  • Fluke i400 AC Current Clamp
    • Nominal current range:
      • 40 A Range 0.5 A to 40 A
      • 400 A Range 5 A to 400 A
    • Basic accuracy:
      • 40 A Range 2% + 0.015 A (45-400 Hz)
      • 400 A Range 2% + 0.04 A (45-400 Hz)
    • Phase shift
      • 40 A Range
      • 0.5 to 1 A: Unspecified
      • 1 A to 5 A: 4°
      • 5 A to 10: A 3°
      • 10 A to 20: A 3°
      • 20 A to 40: A 2°
      • 40 A to 400: A NA
      • 400 A Range
      • 0.5 to 1 A: NA
      • 1 A to 5 A: NA
      • 5 A to 10 A: Unspecified
      • 10 A to 20 A: 2°
      • 20 A to 40 A: 2°
      • 40 A to 400 A: 1.5°
    • Typical bandwidth
      • 40 A Range 5 Hz - 10 kHz
      • 400 A Range 5 Hz - 10 kHz
    • Output level(s)
      • 40 A Range 10 mV/A
      • 400 A Range 1 mV/A
    • Crest factor
      • 40 A Range ≤ 3
      • 400 A Range ≤ 3 to 300 A
      • ≤ 2.5 to 400 A
    • Safety: CAT IV, 600 V, CAT III, 1000 V
    • Maximum non-destructive current: 1000 V AC
    • Warranty: 1 year
    • Maximum conductor size: 32 mm (1.25 inches)
    • Output cable length: 2.5 m (8.2 ft)
    • BNC adapter: Yes
    • Dimensions: 150 x 70 x 30 mm
    • Weight: 114 g
  • Fluke 9040 Phase Rotation Indicator
    • Voltage Range: 40-700 V
    • Frequency Range: 15-400 Hz
    • Operating Timer: Continuous
    • Operating Temperature: 0°C to 40°C
    • Dust/Water Resistance: IP 40
    • Electrical Safety
      • EN 61010
      • EN 61557-7
    • Over voltage category:
      • CAT III, 600 V
      • CAT IV, 300V
    • Size: 124 x 61 x 27 mm
    • Weight: 200 g
    • Power supply: From unit under test
    • Warranty: 2 years

Includes:

  • Fluke 1587 FC 2-in-1 Insulation DMM
  • Fluke i400 Current Clamp
  • Fluke 9040 Phase Rotation Indicator

Join our newsletter to get $10 off your first order!