Hikoki KC36D4A3(HRZ) 4 Piece 18V-36V 2.5Ah-5.0Ah Cordless Brushless MultiVolt Combo Kit

• 1x DV36DC 36V Brushless Impact Driver Drill
• 1x WH36DC (H4Z) 36V Brushless 1/4” Impact Driver
• 1x G3613DVF 36V 125mm Brushless Grinder with paddle switch
• 1x DH3628DA 36V 28mm SDS Plus Rotary Hammer
• 2x BSL36A18 36V (5.0Ah) / 18V (2.5Ah) MultiVolt Battery
• 1x UC18YSL3 18V Rapid Charger with USB port
• 1x Large Site bag

HiKoki DV36DC(H4Z) 36V Cordless Brushless Impact Driver Drill (Skin Only)

Features:

• RFC (Reactive Force Control) - When the gyroscope sensor built in the controller detects a predetermined angle, the motor stops automatically to prevent excessive jerking of the tool
• LED Light warning signals occur with RFC and when the tool is overburdened or overheats
• Due to the highly durable design that is resistant to heat generation, it is difficult to stop even during continuous work.
• The side handle can be mounted in 11 different positions to improve workability.
• Compatible with the HiKOKI MultiVolt battery

Specifications:

• Voltage: 36V
• Motor type: Brushless
• Switch type: Trigger
• Drill chuck type: Keyless metal chuck
• Chuck capacity: 1.5-13mm
• Light LED: White
• Clutch stages: 22 (Torque 1.5 -8.0Nm)
• Maximum Torque Hard Joint: 155Nm
• Maximum Torque Soft Joint: 100Nm
• No load speed - low 0-550rpm
• No load speed - high 0-2200rpm
• Capacity:
• Brick & Masonary: 22mm
• Steel & Aluminium: 20mm
• Wood hole saw: 118mm
• Wood self feed bit: 95mm
• Small screw: M6
• Wood screw: M16 x 100mm
• RFC (Reactive Force Control): Yes
• Forward / Reverse Mode: Yes
• Dimensions (LxHxW) including the battery: 190 x 267 x 89mm
• Weight: 2.1kg
• Battery: Compatible with HiKOKI MultiVolt battery

HiKoki WH36DC(H4Z) 36V 1/4" Cordless Brushless Impact Driver (Skin Only)

Features:

• High torque impact driver
• 5 Modes (Max, Bolt, Bolt Single, Soft, Self Drilling)
• IP56 dust & water resistance*
• Triple Hammer for high efficiency
• 3 LED light provides more visibility in dark and compact areas

Warranty:

• 3 Years Standard Warranty
• 6 Years Extended Warranty if registered online

* These products are designed to be resistant to dust and water. However it is not guaranteed that they will not fail. Refer to user manual for recommended use and maintenance procedures. IP56 Rating applies to certain tools only. Batteries and chargers are not IP56 Rated.

Specifications:

WH36DC 36V Brushless 1/4" Impact Driver

• Power: 36V
• Motor: Brushless
• Capacity: Small screw*¹ 4 to 10 mm (5/32" to 3/8")
• Ordinary bolt: 5 to 18 mm (3/16'' to 23/32'')
• High tension bolt: 5 to 14 mm (3/16'' to 9/16'')
• Self drilling screw: 3.5 to 6 mm (1/8" to 1/4") in diameter
• Tightening torque*²
• Power mode: 215 Nm
• Bolt mode: 215 Nm
• Soft mode: 76 Nm
• No-load speed (with a battery fully charged at 20°C):
• Power mode 0 to 3,400 min-¹
• Bolt mode 0 to 2,900 min-¹
• Bolt single mode 0 to 2,900 min-¹
• Soft mode 0 to 900 min-¹
• Self drilling screw mode 0 to 3,700 min-¹
• Impact rate (with a battery fully charged at 20°C)
• Power mode 0 to 4,100 min-¹
• Bolt mode 0 to 4,100 min-¹
• Bolt single mode 0 to 4,100 min-¹
• Soft mode 0 to 2,000 min-¹
• Self drilling screw mode 0 to 2,200 min-¹
• Drive: 6.35 mm (1/4”) bit holder
• Type of switch: Variable speed trigger switch with forward/reverse changeover lever (with brake)
• LED light: White LED (Always ON, Light only SW-ON, and Always OFF)
• Weight: 1.6 kg
• Dimensions (L x H ): 114 x 241 mm

HiKoki G3613DVF(H4Z) 36V 125mm Cordless Brushless Grinder with Paddle Switch (Skin Only)

Features

• The high power 1500W motor provides more productive work time
• Detachable filter as standard
• Paddle Switch
• Side handle can be mounted in 3 directions
• Toolless wheel guard
• Safety functions - Brake Function, Kick Back Protection
  System, Soft Start, 0 Voltage Restart Protection & Overload Protection
• LED status indicator

Specifications:

• Voltage: 36V
• Motor type: Brushless
• Switch type: Paddle
• Brake Function: Yes
• 0 Voltage Restart Protection: Yes
• Soft Start: Yes
• Overload Protection: Yes
• Variable Speed Control Dial: Yes, 6 settings
• Kick Back Protection System: Yes
• Changeable dust filter: Yes
• Spindle Lock: Yes
• 3 Position side handle: Yes
• Light LED: Yes
• Grinding Wheel Ø: 125mm Ø
• Grinding Wheel bore Ø: 22.23mm Ø
• No load speed: 3,200 -10,000rpm
• Weight including battery: BSL36A18 3.1kg
• Dimensions L x W x H: 389 x 141 x 133mm
• Spindle Lock: Yes
• Battery Compatible with the: HiKOKI MultiVolt battery

HiKoki DH3628DA(H4Z) 36V SDS PLUS Cordless Rotary Hammer (Skin Only)

Specifications:

• Voltage: 36V
• Motor type: Brushless
• Switch type: Variable speed trigger switch
• Impact energy: 3.2J
• Drilling Range Capacity:
• Concrete drill bit: 3.4 - 28mm
• Concrete core bit: 25 - 50mm
• Steel: 13mm
• Wood: 32mm
• Full load impact rate: 0 - 4,300bpm
• No-load rotation speed: 0-950rpm
• 3 operating modes: Hammer only, drilling only & Hammer / Drilling
• Light: LED
• UVP (User Vibration Protection): Yes
• Low Vibration Handle: Yes
• RFC (Reactive Force Control): Yes
• One-Push Action for Quick Bit Mounting: Yes
• Constant Speed Control: Yes
• 2 Step Speed Control: Yes
• Auto Stop Function: Yes
• LED level: Yes
• Weight including battery (BSL36A18): 3.9kg
• Dimensions L x W x H including battery: 356 x 91 x 232mm

HiKOKI BSL36A18 18V-36V 2.5Ah-5.0Ah Li-ion Cordless MultiVolt Battery

HiKOKI UC18YSL3(H0Z) 14.4V-18V Li-ion Cordless Rapid Battery Charger with USB Port & Cooling System

Features:

• Approximately 38 minutes charging time (6.0Ah battery)
• Approximately 32 minutes charging time (5.0Ah battery)
• 18V Rapid charger with cooling and USB port
• Compatible with all HiKOKI 18V slide type li-ion batteries