Unimig U14005K Viper Cut 30 MK II Plasma Cutter
by Unimig
SKU: U14005K
Sold out
Original price
$0.00
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
Current price
$699.00
$699.00
-
$699.00
Current price
$699.00
Low Stock ? Call to Check
Looking very low at our end so best to call or email so we can confirm if this is in stock. Otherwise, we'll order it in from our supplier if we've run out.
Looking very low at our end so best to call or email so we can confirm if this is in stock. Otherwise, we'll order it in from our supplier if we've run out.
Tools Warehouse - McGraths Hill
Unit 1, 2 Rob Place
Vineyard, New South Wales, 2765
02 7200 5360
Low Stock ? Call to Check
Tools Warehouse - Rutherford
5/387 New England Highway
Rutherford, NSW, 2320
02 4044 0539
Allow 3-7 business days
Tools Warehouse - Smithfield
64 Victoria Street
Smithfield, NSW, 2164
02 8711 1980
Allow 3-7 business days
Tools Warehouse - Townsville
72 Pilkington Street
Garbutt, Queensland, 4814
07 4453 0550
Allow 3-7 business days
Cut anything, anywhere. Whether it’s solid or perforated metal, you’ll get a clean cut up to 12mm thick. Now with the addition of a CNC connection, the VIPER CUT 30 Mk II can handle anything you throw at it.
Features:
- 10 AMP PLUG - CONNECT TO ANY STANDARD OUTLET.
- 12mm CLEAN CUT - MILD STEEL.
- 2T/4T TORCH CONTROLS - MORE COMFORT WHEN CUTTING.
- CNC Connection - CONNECT TO A CNC TABLE.
Specifications:
MACHINE SPECIFICATIONS
- PRIMARY INPUT VOLTAGE: 240V Single Phase
- SUPPLY PLUG: 10 AMP
- RATED INPUT POWER (kVA): 7.5
- RATED OUTPUT: 92V
- PROTECTION CLASS: IP21S
- INSULATION CLASS: F
- MINIMUM GENERATOR (kVA): 8.0
- DINSE CONNECTOR: 10/25
- STANDARD: AS/NZ60974-1
- WARRANTY (Years): 2
SIZE & WEIGHT
- DIMENSIONS (mm): 534x166x343mm
- WEIGHT (kg): 8.5kg
PLASMA CUT SPECIFICATIONS
- PLASMA CUT CURRENT RANGE: 20-30A
- PLASMA CUT DUTY CYCLE @ 40°C: 15% @ 30A / 60% @ 23A / 100% @ 20A
- MILD STEEL CUT THICKNESS: 12mm
- MILD STEEL SEVERANCE THICKNESS: 14mm
- ALUMINIUM CUT THICKNESS: 6mm
- ALUMINIUM SEVERANCE THICKNESS: 8mm
- STAINLESS STEEL CUT THICKNESS: 6mm
- STAINLESS STEEL SEVERANCE THICKNESS: 8mm
- AIR FLOW DRAW OFF (L/min): 170
- AIR FLOW PRESSURE (Bar): 5-6 (70-87 psi)
- PLASMA ARC START: Pilot Arc
Includes:
- VIPER™ CUT 30 Mk II Plasma Cutter
- 4m SC30 Plasma Torch
- 3m 300A Earth Clamp
- Air Regulator
- Operating Manual
