Unimig PK11109 Razor 200 Pulse Welder Combo Kit

Includes: 

• Unimig U11003K Razor 200 Pulse MIG/TIG/STICK Welder Kit

  • Features:

    • Single & Double Pulse MIG
    • 5” LCD Touch Screen Display
    • Over 100+ Synergic Programs
    • Hot Start and Crater Fill
    • 4 Geared Wire Drive
    • High Frequency DC TIG
    • STICK (MMA)
    • GLICK Heat Control
    • Job Memory (100 Jobs)
    • Digital Control Torch
    • 15A Plug
    • 100mm & 200mm Spool Sizes
    • Ready to weld
    • IP23S
    • Lightweight and Portable
    • Generator Compatible
    • 2T / 4T / SPOT
    • Adjustable Arc Length
    • Inductance Control

    Specifications:
    

    • PRIMARY INPUT VOLTAGE: 240V Single Phase
    • SUPPLY PLUG: 15 AMP
    • Ieff (A): 14.9
    • RATED OUTPUT: 40A/16V-200A/24V
    • PROTECTION CLASS: IP23S
    • INSULATION CLASS: H
    • MINIMUM GENERATOR (kVA): 11.0
    • DINSE CONNECTOR: 35/50
    • STANDARD: AS/NZ60974-1
    • WELDS: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
    • WARRANTY (Years): 3

    MIG SPECIFICATIONS
    

    • MIG WELDING CURRENT RANGE: 40-200A
    • MIG DUTY CYCLE @ 40°C: 15% @ 200A, 60% @ 101A, 100% @ 78A
    • MIG WIRE SIZE RANGE: 0.6-1.2mm
    • MIG WIRE SPOOL SIZE: 1kg / 5kg
    • MIG WELDING THICKNESS RANGE: 1-10mm
    • DRIVE ROLLER SIZE: 30/22

    TIG SPECIFICATIONS
    

    • TIG FUNCTION TYPE: High-Frequency
    • TIG WELDING CURRENT RANGE: 5-200A
    • TIG DUTY CYCLE @ 40°C: 20% @ 200A, 60% @ 116A, 100% @ 90A
    • TIG WELDING THICKNESS RANGE: 1-8mm

    STICK SPECIFICATIONS
    

    • STICK WELDING CURRENT RANGE: 20-180A
    • STICK DUTY CYCLE @ 40°C: 15% @ 180A, 60% @ 91A, 100% @ 70A
    • STICK ELECTRODE RANGE: 2.5-4.0mm
    • STICK WELDING THICKNESS RANGE: 2-12mm

    SIZE & WEIGHT
    

    • DIMENSIONS (mm): 605x230x400mm
    • WEIGHT (kg): 17kg

    MACHINE FEATURES
    

    • WIRE DRIVE: 4 Geared
    • VRD: Yes
    • SYNERGIC PROGRAMS: Yes
    • BURNBACK ADJUSTMENT: Yes
    • THERMAL OVERLOAD PROTECTION: Yes

    Includes:
    

    • RAZOR™ 200 PULSE MIG/TIG/STICK Welder
    • 3m DM26 Digital MIG Torch fitted with carbon-polyamide liner
    • 3m Twist Lock Electrode Holder
    • 3m 300 Amp Earth Clamp & Lead
    • Twin Gauge Argon Regulator
    • 1.8m Gas Hose Complete with fittings
    • Operating Manual
    • 2kg 1.2mm 5356 HYPERARC Aluminium Wire
    • DM26 Consumable Starter Kit

• Unimig AM5356 1.2MM 2.0kg XA Aluminium MIG Welding Wire

  • UNIMIG 5356 is the highest quality consistent aluminium welding wire available anywhere in the world. Because our manufacturer is the only one in the world that melts and casts their own redraw rod and they have complete control of the manufacturing process allowing them to tightly control and refine the alloys’ chemical composition to exacting tolerances, this ensures premium quality aluminium wire products and outstanding welding performance.

    The surface finish of aluminium MIG wire is the greatest influencing factor of an electrode’s performance and consistency during welding. A poor surface finish causes a variety of welding problems and interruptions such as poor feedability, premature liner wear, reduced contact tip life, porosity, dirty welds and burn backs. These welding interruptions increase your manufacturing costs and reduce productivity. Our focus is on providing the smoothest and most uniform surface finish possible – one that is clean and free of contamination and hydrocarbons. The consistent feed ability of UNIMIG aluminium wire is accomplished through use of advanced wire drawing technology and a proprietary triple shaving process. All UNIMIG aluminium wire goes through a unique testing and control process consisting of three steps: surface finish testing, feed ability testing, and weldability testing. A SEM (Scanning Electron Microscope) is used to inspect and control the wires surface finish and cleanliness, ensuring the best surface finish possible and superior welding performance.

    Utilising additional manufacturing processes and controls for wire cast, helix and diameter tolerance, we further ensure high quality, premium aluminium MIG wire. A consistent and tightly controlled diameter tolerance is another important variable that contributes to arc stability, uniformity, and quality aluminium welds. To prevent diameter fluctuations that can have a profound, negative impact on welding conditions and amperage efficiency, we tightly control diameter tolerance on all of our aluminium welding wire to exacting standards to ensure consistent welding performance and results.

    Features:

    • High Quality
    • Triple Shaved
    • X-Ray Quality
    • Precision Layer Wound
    • Smooth Feeding
    • Low Fume Factor
    • Clean Welds
    • International Approvals
    • AWS, ABS, CWB, Lloyds Register, DNV, TUV, DB