Unimig PK11108 Razor Multi 230 AC/DC Welder Combo Kit

Includes: 

• Unimig U11004K RAZOR MULTI 230 AC/DC MIG/TIG/STICK Welder

  • Features:

    • Dual Plug Compatibility (10A & 15A)
    • Connect to any 10A or 15A outlet for even greater versatility. 10A mode
    • limits the output of the machine to 200A, whereas 15A mode allows
    • use of the full 230A in MIG.
    • Smart Fan
    • Smart Fan diminishes noise, saves power, helps reduce energy costs,
    • and minimises the number of contaminants being pulled through the
    • machine.
    • Power Factor Correction (PFC)
    • PFC gives you maximum electrical efficiency and automatically compensates for any voltage fluctuation.
    • Job Memory
    • The job memory function allows you to enter and store weld parametersettings under job numbers. Weld parameters can be further adjusted and stored as required. A total of 20 Jobs can be memorised and stored for recall.
    • 5” Colour LCD Screen
    • Change settings with ease with the intuitive screen controls and nextgeneration user interface.
    • Generator Compatible
    • Going off the grid? The RAZOR MULTI 230 AC/DC can be connected to a generator, we recommend one with at least an 8.5kVA rating for 10A mode, 10kVA for 15A mode.
    • IP21 Rating
    • Rated IP21, so it’s protected from touch by fingers and objects greater than 12mm, and water spray from a vertical direction.
    • Wireless Foot Control Ready
    • This machine supports the connection of both a wired or wireless foot control for extra versatility and convenience while welding. You can adjust your amperage hands-free to avoid disrupting your torch movement, and the wireless option reduces cables and adds greater manoeuvrability as well.
    • Dual Gas Input
    • With dual gas inputs for MIG and TIG gases, you can keep the machine setup for both processes, saving you time during setup when swapping between processes.

    Specifications:

    • PRIMARY INPUT VOLTAGE: 240V Single Phase
    • SUPPLY PLUG: 15 AMP
    • Ieff (A): 9.4 / 15
    • RATED OUTPUT:
    • 25A/15.3V-200A/24V (10A)
    • 25A/15.3V-230A/25.5V (15A)
    • PROTECTION CLASS: IP21
    • INSULATION CLASS: H
    • MINIMUM GENERATOR (kVA) 8.5 (10A) / 10 (15A)
    • DINSE CONNECTOR: 35/50
    • STANDARD: AS/NZ60974-1
    • WELDS: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
    • WARRANTY (Years): 3

    MIG SPECIFICATIONS
    

    • MIG WELDING CURRENT RANGE: 25-200A (10A) / 25-230A (15A)
    • MIG DUTY CYCLE: @ 40°C 10% @ 200A, 60% @ 81A, 100% @ 63A (10A)
    • 25% @ 230A, 60% @ 187A, 100% @ 145A (15A)
    • MIG WIRE SIZE RANGE: 0.6-1.0mm
    • MIG WIRE SPOOL SIZE: 1kg / 5kg
    • MIG WELDING THICKNESS RANGE: 1-10mm
    • DRIVE ROLLER SIZE: 30/22

    
    TIG SPECIFICATIONS
    

    • TIG FUNCTION TYPE: AC/DC High-Frequency
    • TIG WELDING CURRENT RANGE: 10-200A
    • TIG DUTY CYCLE: @ 40°C 25% @ 200A, 60% @ 130A, 100% @ 100A (10/15A)
    • TIG WELDING THICKNESS RANGE: 1-8mm

    STICK SPECIFICATIONS
    

    • STICK WELDING CURRENT RANGE: 10-200A
    • STICK DUTY CYCLE: @ 40°C 10% @ 200A, 60% @ 81A, 100% @ 63A (10A)
    • 25% @ 200A, 60% @ 130A, 100% @ 100A (15A)
    • STICK ELECTRODE RANGE: 2.5-4.0mm
    • STICK WELDING THICKNESS RANGE: 2-12mm

    SIZE & WEIGHT
    

    • DIMENSIONS (mm) 660x210x330mm
    • WEIGHT (kg) 20kg

    MACHINE FEATURES
    

    • WIRE DRIVE: Geared
    • VRD: Yes
    • SYNERGIC PROGRAMS: Yes
    • BURNBACK ADJUSTMENT: Yes
    • THERMAL OVERLOAD PROTECTION: Yes
    • POWER FACTOR CORRECTION (PFC): Yes

    Includes:

    • RAZOR MULTI 230 AC/DC MIG/TIG/STICK Welder
    • 4m SB24 MIG Torch
    • 4m ARC TORCHOLOGY T2 TIG Torch
    • 3m Twist Lock Electrode Holder
    • 3m 300 Amp Earth Clamp & Lead
    • Twin Gauge Argon Regulator
    • 2m Quick-connect Gas Hose
    • 15A to 10A Conversion Lead
    • Operating Manual

• Unimig U21020 Black Trade Series Welding Helmet 

  • Features:

    • 1/1/1/1 Classification - Superior optical clarity with a 1/1/1/1 classification. Get an Auto-Darkening Filter (ADF) that’s scored top marks across the board for a crystal-clear view of your weld at every angle.
    • Memory States - Store up to three of your most frequently used shade settings with the memory state buttons and have your helmet ready to go in an instant.
    • 100x83.4mm View Size - Superior visibility in every situation. The 100x83.4mm viewing area lets you see every weld with complete clarity.
    • External Grind - Button Seamlessly switch to grind mode with the click of a button. When the helmet is in grind mode a small LED will illuminate, so you don’t need to take the helmet off to check.
    • 4 Arc Sensors - Detect every arc instantly. The four optimally positioned arc sensors trigger the lens, darkening it and keeping your eyes shielded from the start, even when you’re out of position.
    • Backup Battery - A CR2450 backup battery improves the performance and reliability of the auto-darkening filter.
    • 4 Point Harness - Get the perfect fit and stay comfortable for hours. Adjust all 4 points of contact to suit you, and have the weight spread more evenly, minimising neck strain.

    Specifications:

    • Filter Dimensions: 114x133x9.5mm
    • View Size: 100x83.4mm
    • Arc Sensors: 4
    • Classification: 1/1/1/1
    • Light State: 4
    • Dark State: 5-13
    • UV/IR Protection: DIN15
    • Time from Light to Dark: 0.04ms
    • Time from Dark to Light: 0.1-0.9s
    • Sensitivity Delay: Adjustable (1-5 for low-high)
    • Power Supply: Solar Cells & CR2450 Replaceable Battery
    • Warranty: 3 Years
    • Operating Temperature: -10˚C to 65˚C
    • Storage Temperature: -20˚C to 85˚C
    • Shade Control: Yes
    • Grind Mode: Yes (External)
    • Minimum TIG Amperage: 3A
    • Standards:
    • AS/NZS 1337.1 B (High Impact)
    • AS/NZS 1338.1 (Auto-Darkening)

    Replaceable Parts
    

    • Trade Series Welding Helmet Lens Kit: U21023
    • 4 Point Harness: U21024
    • 4 Point Harness Sweatband & Back Pad: U21025
    • Magnification Lens:
    • U21010 - 1.5x Magnification Lens
    • U21011 - 2.0x Magnification Lens
    • U21012 - 2.5x Magnification Lens

• Unimig UMSK24 Starter Kit to suit Binzel Style 24 MIG Torch
  

  • Includes:

    • 1 x MIG Pliers (UMMP)
    • 2 x Conical Nozzles (PGN24CON)
    • 2 x Tip Holders (PCTH24)
    • 2 x Gas Diffusers (PCGD24)
    • 10 x 0.8mm Contact Tips (PCT0009-08)
    • 10 x 0.9 Contact Tips (PCT0009-09)

• Unimig U42005 Starter Kit to suit T2 TIG Torch

  • We’ve revamped our TIG consumable starter kits! Now more versatile than ever, we’ve included a wider range of sizes for ceramic and quartz cups. Our starter kit now comes with everything you need to get welding across a wide range of applications.

    Includes:

    • 1 x UMCT2C07 – CERAMIC CUP SIZE 7
    • 1 x UMCT2C08 – CERAMIC CUP SIZE 8
    • 1 x UMCT2C10 – CERAMIC CUP SIZE 10
    • 1 x UMCT2GL16 – GAS LENS COLLET BODY 1.6MM
    • 1 x UMCT2GL24 – GAS LENS COLLET BODY 2.4MM
    • 1 x UMCT2HG – HEAD GASKET
    • 1 x UMCT2SN – HEAT ZONE ISOLATOR
    • 1 x UMCT2QZ06 – QUARTZ CUP SIZE 6
    • 1 x UMCT2QZ08 – QUARTZ CUP SIZE 8
    • 1 x UMCT2QZ10 – QUARTZ CUP SIZE 10
    • 1 x UMCT2QZSN – QUARTZ ZONE ISOLATOR
    • 2 x TR000516 – Rare Earth Tungsten Electrode 1.6mm
    • 2 x TR000524 – Rare Earth Tungsten Electrode 2.4mm
    • 1 x UMCT2SBC – SHORT BACK CAP

• Unimig MS.9B ER70S-6 0.9mm 5kg Mild Steel MIG Welding Wire
  

  • ER70S-6 Mild Steel MIG Wire is a high quality, copper-coated, triple de-oxidised solid MIG welding wire supplied on 15kg, 5kg and 1Kg precision layer wound plastic spools. The wire contains higher levels of manganese and silicon than most standard grades of MIG wire to produce high-quality welds. The high silicon content increases the fluidity of the weld pool creating a smoother bead appearance and resulting in minimal post-weld grinding. The wire is engineered to provide porosity-free, x-ray quality welds with high tensile strength. ER70S-6 Solid MIG Wire requires a shielding gas such as CO² or Argon/CO² mixes.

    Classification:
    

    • AS/NZS 2717.1:ES6 – CG – W503H
    Approvals:
    
    
    • LLOYDS REGISTER
    • DET NORSKE VERITAS
    • AMERICAN BUREAU OF SHIPPING
    • GERMANISCHER LLOYD
    • CANADIAN WELDING BUREAU.

    Specifications:

    • MIG WIRE DIAMETER: 0.9mm
    • MIG WIRE WEIGHT: 5.0kg / 200mm

• Unimig AT5356-2.4-1KG Aluminium TIG Welding Rods
  
  • UNIMIG 5356 Aluminium TIG Welding Rods are a triple shaved TIG wire for the purpose of welding cats and wrought aluminium and specifically the 3000, 5000 & 6000 series. 5356 is sometimes referred to as “marine grade” because it is widely used in the marine industry and it’s very commonly found in general fabrication applications as well. The major element in 5356 wire is 5% magnesium. The wire has excellent weldability and corrosion resistance. The wire is packaged in 1kg & 5kg tubes.
    
    Approvals:
    
    AWS • ABS • CWB • Lloyds Register • DNV • TUV • DB

• Unimig TI316L-1.6-1 1.6mm 1kg TIG Stainless Steel Filler Welding Rods

  • UNIMIG 316L Stainless TIG Welding Rods are a high-quality low carbon TIG wire used for TIG welding 316 and 316L stainless steel alloys. UNIMIG 316L is also suitable for welding other 300 grade stainless steels such as 302 and 304 grades. This particular rod can also be used for gas (oxy/acetylene) welding and is available in 1kg & 5kg tubes.

    Classification:

    • AWS/ASME SFA 5.9 ER316L
    • DIN8556 WSG-2 Cr Ni Mo 1912
    • EN1272 W19123 L
    • M.No. 1.4430

    Approvals:

    • TUV Nord • DB • CWB

• Unimig UMWG8 Rogue Heavy Duty Leather Welding Gloves
  

  • These Rogue Heavy Duty Welding Gloves are made of heat and flame resistant selected shoulder split cowhide. The standard feature of these gloves include a full sock lining for added comfort, a reinforced palm and Kevlar stitching with welted seams for added durability.

    Features:

    • Premium cowhide leather
    • Reinforced palm
    • Kevlar Thread
    • 16″ Length

• Unimig UM-S-TG1 Rogue TIG Welding Gloves

  • ROGUE TIG Welding Gloves are made from premium goat hide leather. The high-strength Kevlar stitching is durable against heat, and cotton-lined palms are used to increase control and decrease fatigue in your hands. The reinforced leather side patch assists in durability and reduces fatigue. The glove has also been designed to give you superior fingertip sensitivity for accurate welds.

    Features:

    • Increased feel
    • Decreased fatigue
    • Premium goat hide leather
    • High-strength Kevlar stitching