Beehive FLZT2HMB 620mm x 270mm x 280mm Platinum Tool Bag with Hard Moulded Base

100% Fully Lockable version of our popular Side Pocket Double Base Type 2 tool bag, plus 30mm deeper, with a hard HDPE moulded base.

Perfect for the FIFO worker and to stop your tools from going missing on site.

Internally the layout of pockets and centre divider section remains the same as the Side Pocket Double Base Tool bag. Externally you will notice some improvements to the tool bag, the front and side pockets along with the front lid have YKK padlock zips that allow you to fully lock and secure your tools.

* NOTE padlocks not included

Features:

• 100% Fully lockable! This includes all of the outer pockets with heavy duty YKK zips with lockable zip slides as well as lockable zip around the top lid of the bag
• Zip slides have wooven pull tags for ease of opening and closing
• Fully moulded wrap around hard HDPE bases added to the bottom of your toolbag for extra protection to the bottom of your toolbag
• White Hi Vis reflective tape meets retroreflective requirments of ASNZ 1906.1 Class IW (WZ) - welded (not stiched) to front flap as well as end pockets
• Heavy duty rubber carry handles on sides of the bag above each end pockets...easier to lift the bag and reduces back injury
• Front pockets & side pockets have moved up higher on the bag to prevent them from wearing out on the bottoms
• A double layer of vinyl has been added to the bottom of the external pockets to stop holes and wearing from any sharp or heavy tools stored in them
• Increased pocket width to 65mm for the external and front pockets
• 100mm hook & loop fastening tape on the front pockets to allow easier adjusting of the lid flap depending on weather your tool bag is full or half full
• Extra 30mm depth overall on the bag - more tool storage room
• Mesh pouch on a side pocket suits smartphones (& iphone’s)
• A3 size clear document holder inside of lid
• 4 Tool pockets on front of the centre divider pocket
• 6 Tool pockets on front and back walls of tool bag
• Centre divider pockets with held closed with hook & loop fastening tape & webbing tabs
• 10 Varied tool pouch sizes on back of centre divider pocket
• Reinforced HDPE base and padded anti-slip shoulder pad
• Adjustable inside strap with buckles to prevent bag flaring
• Manufactured from Australian Made heavy duty reinforced ripstop vinyl with anti fungal protection as well as being UV resistant
• Vinyl material is flame retardent tested to parts 2 & 3 of AS1530 standard, AS2001.2.3 tensile strength standard, BS 3424.5 tongue tear standard, AS1441.6 flex cracking standard. To meet Australian Building codes
• The PVC used is free of BPA, lead & other heavy metals & the lacquer coating is non solvent based.

Specifications:

• External Dimensions: 620mm long (includes pockets) x 270mm wide (includes pockets) x 280mm high
• Internal Dimensions: 480mm long x 200mm wide x 280mm high
• Front Pockets: 250/230mm wide x 70mm deep x 210mm high
• Side Pockets: 200mm wide x 70mm deep x 210mm high