Makita DK0131G301 3 Piece 40V Max 4.0Ah Cordless Brushless Combo Kit
by Makita
SKU: DK0131G301
Sold out
Original price
$1,669.00
Original price
$1,669.00
-
Original price
$1,669.00
Original price
$1,669.00
Current price
$1,585.55
$1,585.55
-
$1,585.55
Current price
$1,585.55
Includes:
- HP001GZ - 40V Max Brushless Hammer Driver Drill
- TW001GZ - 40V Max Brushless 3/4" Impact Wrench
- GA013GZ - 40V Max Brushless 125mm (5") Paddle Switch Angle Grinder
- BL4040 x2 - 40V Max 4.0Ah Battery
- DC40RA - 40V Max Single Port Rapid Charger
- 199935-1 - Tote Bag
Features:
- Heavy duty power with 141Nm peak torque
- Active feedback sensors shut down the tool in the event of a kickback
- Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
- 35% faster drilling speed compared with the equivalent 18V model
- Electronic clutch for selecting between 41 torque range settings
Specifications:
- Impact Rate:
- Hi: 0 - 39,000ipm
- Lo: 0 - 9,750ipm
- Max. drilling capacities in masonry: 20mm
- Max. drilling capacities in steel: 20mm
- Max. drilling capacities in wood:
- Auger bit: 50mm
- Self-feeding bit: 76mm
- Hole saw: 152mm
- Max. lock torque: 125Nm
- Max. peak torque: 141Nm
- Max. tightening torque:
- Hard: 140Nm
- Soft: 68Nm
- No Load Speed:
- Hi: 0 - 2,600rpm
- Lo: 0 - 650rpm
- Overall Length: 182mm
- Skin weight: 2.0kg
- Voltage: 40V Max
- Weight (with battery): 3.0kg (BL4040)
Features:
Makita GA013GZ 40V Max 125mm (5") Cordless Brushless Paddle Switch Angle Grinder (Skin Only)
- Heavy duty power with 2,050Nm nut busting torque
- High durability construction with battery vibration suppression protecting the battery
- Optimised application selector with 6 modes adapting speed and impacts for each task
- Full speed mode shortens the distance of trigger travel required to hit full speed
- 4 Stage power selection for optimum rpm and fastening torque
- Drive Shank: 3/4" Square C-Ring
- Impact Rate:
- Max: 0-2,500ipm
- Hard: 0 - 2,400ipm
- Med: 0 - 2,200ipm
- Soft: 0 - 1,900ipm
- Max. capacities high tensile bolt: M10 - M27
- Max. capacities standard bolt: M12 - M36
- Max. fastening torque:
- Max: 1,800Nm
- Hard: 1,500Nm
- Medium: 840Nm
- Soft: 450Nm
- No Load Speed:
- Max: 0-1,800rpm
- Hard: 0 - 1,400rpm
- Med: 0 - 1,150rpm
- Soft: 0 - 950rpm
- Nut busting torque: 2,050Nm
- Overall Length: 217mm
- Skin weight: 3.2kg
- Voltage: 40V Max
- Weight (with battery): 4.2kg (BL4040)
Features:
- Heavy duty power cutting 40% faster than the 18V equivalent model
- High durability with advanced protection against heat and dust
- Active feedback sensors shut down the tool in the event of a kickback
- Enhanced safety features including an electric brake, soft start and anti-restart
- Improved heat dissipation capacity allows for continuous heavy duty use
Specifications:
- Electric Brake: Yes
- No Load Speed: 8,500rpm
- Overall Length: 410mm
- Skin weight: 2.2kg
- Switch Type: Paddle Switch
- Voltage: 40V Max
- Weight (with battery): 3.2kg (BL4040)
- Wheel diameter: 125mm (5")
Features:
- Digital communication between the tool & battery for optimised performance
- Heavy duty cell casing significantly improves the batteries impact resistance
- Battery ventilation system maximises battery life
- Short circuit prevention structure protects terminals from dust and moisture
- 3-layer moisture protection shields cells from water ingress
Specifications:
- Cell Capacity: 4.0Ah
- Charge Time: 45mins
- Energy Capacity: 144Wh
- Net Weight: 1.0kg
- Voltage: 40V Max
Features:
- Rapid charging system communicates data between battery and charger for optimum charging
- Equipped with dual cooling fans, cooling the battery & charging circuit for rapid charging
- Compatible with ADP10 adaptor (optional accessory) for charging 18V LXT batteries
- Large charging status indicator light & selectable full charge melody
Specifications:
- Charge Time: 45mins (BL4040), 28mins (BL4025), 40mins (BL1860B using APD10)
- Net Weight: 1.0kg
- Voltage: 40V Max
