Fluke I2000FLEX 2000A Flexible AC Current Clamp

The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Features:

• Three ranges: 20A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output
• Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
• Maximum conductor diameter 178 mm
• CAT III 600 V safety rating

Specifications:

• Current ranges
• 20 A
• 200 A
• 2000 A
• AC rms
• Output sensitivity (AC-coupled)
• 1 mV
• 10 mV
• 100 mV
• 1 mV per A
• Load impedance: 100 kΩ minimum
• Accuracy at
• +25°C
• ±1% of range (45 Hz to 65 Hz)
• Linearity:
• 10% to 100% of range
• ±0.2% of reading
• Noise:
• 8 mV AC rms (30 A)
• 2 mV AC rms (300 A, 3000 A)
• Frequency range: 10 Hz to 20 kHz (-3 dB)
• Phase error:
• < ±1° (45 Hz to 65 Hz)
• ±10° (at 20 kHz)
• Position sensitivity:
• with cable > 25 mm from the coupling
• ±2% of range
• External field:
• with cable > 200 mm from the head
• ±1% of range
• Power supply: 2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
• Temperature Coefficient: ±0.08% of reading per °C
• Working voltage:
• see Safety standards section
• 600 V AC rms or DC
• Head Circumference: 610 mm (24 in)
• Head cable diameter: 14.3 mm (0.56 in)
• Head bend radius: 38.1 mm (1.5 in)
• Cable length (head to electronics): 2 m (6.56 ft)
• Output connection: Molded 4 mm safety plugs (not integrated)
• Operating temperature range: 0°C to +70°C (32°F to 158°F) (head and electronics)
• Storage temperature range:
• -40°C to +105°C (-40°F to 221°F) (head)
• -20°C to +85°C (-4°F to 185°F) (electronics)
• Operating humidity: 15% to 85% (non-condensing)
• Weight:
• 180 g (6.34 oz) (head)
• 190 g (6.70 oz) (electronics)
• Safety standards:
• EN 61010-031: 2002
• EN 61010-2-032: 2002
• EN 61010-1: 2001
• 600 Vrms, Category III, Pollution Degree 2
• Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz.
• EMC standards: EN 61326: 1998 +A1, A2, and A3
• Dimensions (H x W x D): 116 x 68.5 x 30 mm (4.56 x 2.69 x 1.18 in)