Fluke FLUKE-116/62 MAX+ Digital Multimeter & IR Thermometer Combo Kit

Features:

• Fluke 116 HVAC Multimeter
• Built-in thermometer for HVAC applications
• Microamps to test flame sensors
• Low input impedance helps prevent false readings due to ghost voltage
• Work in poorly lit areas with the Large white LED backlit display
• True-rms voltage and current for accurate measurements on non-linear loads
• Measures 10 A directly (20 A overload for 30-seconds) without a current clamp
• Resistance, continuity, frequency and capacitance
• Record signal fluctuations using Min/Max/Average and elapsed time stamps
• Easy to use with one hand
• Hands free operation with optional magnetic hanger (ToolPak™)
• CAT III 600 V safety rated
• Fluke 62 MAX+ Infrared Thermometer
• Measure -30 °C to 650 °C (-22 °F to 1202 °F)
• Extremely accurate: up to +1.0 °C or + 1.0% of reaching (Fluke 62 MAX+)
• IP54 rating for water resistance and dust proof allow you to work rain or shine and even in the most dirty or dusty industrial sites
• Strong enough to withstand a 3m drop. No worry even if you work from a ladder
• Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box
• Dual lasers: The 62 MAX+ has dual lasers to help you identify area to be measured

Specifications:

• Fluke 116 Multimeter
• Maximum voltage between any terminal and earth ground: 600 V
• Surge protection: 6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2
• Display: 6,000 counts, updates 4 per second
• Bar graph: 33 segments, updates 32 per second
• Operating Temperature: -10°C to +50°C
• Storage Temperature: -40°C to +60°C
• Battery type: 9 volt Alkaline, NEDA 1604A/ IEC 6LR61
• Battery Life: 400 hours typical, without backlight
• DC millivolts
• Range/Resolution: 600.0 mV / 0.1 mV
• Accuracy ±([% of reading] + [counts]): 0.5% + 2
• DC volts
• Range/Resolution
• 6.000 V / 0.001 V
• 60.00 V / 0.01 V
• 600.00 V / 0.1 V
• Accuracy ±([% of reading] + [counts]): 0.5% + 2
• Auto volts
• Range: 600.0 V / 0.1 V
• Accuracy
• 2.0% + 3 (DC, 45 Hz to 500 Hz)
• 4.0% + 3 (500 Hz to 1 kHz)
• AC millivolts¹ True RMS
• Range: 600.0 mV / 0.1 mV
• Accuracy
• 1.0% + 3 (DC, 45 Hz to 500 Hz)
• 2.0% + 3 (500 Hz to 1 kHz)
• AC volts¹ True RMS
• Range/Resolution
• 6.000 V / 0.001 V
• 60.00 V / 0.01 V
• 600.0 V / 0.1 V
• Accuracy:
• 1.0% + 3 (DC, 45 Hz to 500 Hz)
• 2.0% + 3 (500 Hz to 1 kHz)
• Continuity
• Range: 600 Ω / 1 Ω
• Accuracy: Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer.
• Ohms
• Range/Resolution
• 600.0 Ω / 0.1 Ω
• 6.000 kΩ / 0.001 kΩ
• 60.00 kΩ / 0.01 kΩ
• 600.0 kΩ / 0.1 kΩ
• 6.000 MΩ / 0.001 MΩ
• Accuracy: 0.9% + 1
• Range/Resolution: 40.00 MΩ / 0.01 MΩ
• Accuracy: 1.5% + 2
• Diode Test
• Range/Resolution: 2.000 V / 0.001 V
• Accuracy: 0.9% + 2
• Capacitance
• Range/Resolution
• 1000 nF / 1 nF
• 10.00 μF / 0.01 μF
• 100.0 μF / 0.1 μF
• 9999 μF / 1 μF
• 100 μF to 1000 μF
• Accuracy: 1.9% + 2
• Range/Resolution: > 1000 μF
• Accuracy: 5% + 20%
• LoZ capacitance
• Range: 1 nF to 500 μF
• Accuracy: 10% + 2 typical
• Temperature² (Type-K thermocouple)
• Range/Resolution: -40°C to 400°C / 0.1°C
• Accuracy² : 1% + 10
• Range/Resolution: -40°F to 752°F / 0.2°F
• Accuracy² : 1% + 18
• AC μamps true-rms (45 Hz to 500 Hz)
• Range/Resolution: 600.0 μA / 0.1 μA
• Accuracy: 1.0% + 2
• DC μamps
• Range/Resolution: 600.0 μA / 0.1 μA
• Accuracy: 1.0% + 2
• Hz (V or A input)²
• Range/Resolution:
• 99.99 Hz / 0.01 Hz
• 999.99 Hz / 0.1 Hz
• 9.999 Hz / 0.001 Hz
• 50.00 Hz / 0.01 Hz
• Accuracy 0.1% + 2
• Size: 167 x 84 x 46 mm (6.57 x 3.31 x 1.82 in)
• Weight: 550 g
• Warranty: 3 years
•  Fluke 62 MAX+ Infrared Thermometer
• Temperature range: -30°C to 650°C (-22°F to 1202°F)
• Accuracy:
• ±1.0°C or ±1.0% of reading, whichever is greater
• -10°C to 0°C: ±2.0
• -30°C to -10°C: ±3.0
• Response time: (95%) < 300 ms (95% of reading)
• Spectral response: 8 to 14 microns
• Emissivity: 0.10 to 1.00
• Optical resolution: 12:1 (calculated at 90% energy)
• Display resolution: 0.1°C (0.2°F)
• Repeatability of readings: ±0.5% of reading or <±0.5°C (1°F), whichever is greater
• Power: AA battery
• Battery life: 8 hours with laser and backlight on
• Weight: 255 g (8.99 oz)
• Size: 175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)
• Operating temperature: 0°C to 50°C (32°F to 122°F)
• Storage temperature: -20°C to 60°C (-4°F to 140°F), (without battery)
• Operating humidity: 10% to 90% RH non-condensing at 30°C (86°F)
• Operating altitude: 2000 meters above mean sea level
• Storage altitude: 12,000 meters above mean sea level
• IP rating: IP 54 per IEC 60529
• Drop test: 3 meters
• Vibration and shock: IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
• EMC: EN 61326-1:2006 EN 61326-2:2006
• Standards and agency approval: Compliance EN/IEC 61010-1: 2001
• Laser safety: FDA and EN 60825-1 Class II

Includes:

• Fluke 116 HVAC Multimeter with Temperature and Microamps
• Fluke 62 MAX+ Infrared Thermometer