CRC 8009 500ml F2 Multi-Purpose Contact Adhesive Tin
Use a brush or roller. Apply a thin, even layer of adhesive to both surfaces; brushing in short, quick strokes. Between 10-20 minutes, the solvent should have evaporated and the adhesive should be ‘tacky’ enough to bond the surfaces together. A useful indication is to touch the surfaces (all over) with a clean finger: if they are ‘sticky’ to the touch, without transferring to your finger, they are ready to bond together. It is imperative that no solvent is trapped between the bond. Position components accurately, as when contact is made, the bond will be immediate. Apply maximum overall instant pressure, taking care to expel any air bubbles, to ensure a complete bond. Use of a hand pressure roller, e.g. a vinyl-flooring roller, provides good direct pressure. An alternative method is heat reactivation to 80°C. In this case, care must be taken to ensure that all solvent has evaporated before heating.
Features:
Versatile – Multipurpose High bond strength – Bonds most materials and substrates. Water resistant / Flexible – Ideal for a wide variety of uses. Easy to use, no clamping required.
Specifications:
- Country Of Manufacture: New Zealand
- Flammability: Highly Flammable
- Flash Point: < 0°c
- Unit Depth: 80mm
- Unit Height: 108mm
- Unit Size: 500ml
- Unit Width: 80mm
