Cigweld 1-1601-60 CutSkill 60 Plasma Cutter

Meet the Cigweld plasma cutter CutSkill 60 Plasma System – the big brother to the revolutionary CutSkill 35/45 Plasma Systems.

The new CutSkill 60 packs all the innovative features of the CutSkill 35 and 45 but can clean cut through 20mm Mild Steel and has Gouging capability to top it off!

Ideal for the workshop for serious cutting of Mild/Stainless Steels and Aluminum, the CutSkill 60 delivers a powerful punch for use with a 15 amp socket*.

Industry-leading user interface that takes manual plasma cutting to a whole new level!
This smart technology interface not only incorporates the latest in colour LCD technology but also simplifies the entire cutting set up process.

With a single control knob, the operator can select each function necessary to suit their desired needs. Decide if you want your torch set to manual or latch mode, whether you’re cutting flat or grid plate, gouging then adjust your current and you’re ready to cut!  All of these actions are clearly displayed on the impressive 2.8” colour LCD display.

Features:

• Parts In Place (PIP) Protection   - If the torch consumables are not correctly installed the torch will not arc, increasing the lifespan of the consumables and torch itself.
• Output Current  - Current range for this Power Source is 15-30A. Provides DC Output.
• Removable Air Filter with Purging Valve  - Designed to filter and purge any air contaminants, increasing consumables lifespan. 
• Removable for easy cleaning and cleverly installed flush to rear panel to prevent damage. *For optimal filtration, an Inline Filter is recommended P/N: CSP337039.
• Cutting
• 10mm Genuine Cut, Mild Steel, Aluminum & Stainless Steel.
• 12mm Severance Cut, Mild Steel. Aluminum & Stainless Steel.
• 8mm Pierce Cut. 
• In-Built Regulator - In-Built Pre Calibrated Regulator to ensure optimal air pressure for superior cutting performance
• Generator
• Recommended generator required: 7.5kVA at 0.8 Power Factor.
• Air Compressor - Recommended air compressor required: 800kPa, 5.3 CFM.
• Fully Compliant to AS 60974.1-2006. Enclosure rated to IP21S.
• 1 Year Limited Warranty* *Refer to operating manual for further details.

Specifications:

• Weight: 18 kg
• Brand: Cigweld
• Range:  Trade/DIY
• Number of Phases: Single Phase
• Generator Required: 15 kVA (at 0.8 Power Factor)
• Duty cycle: 60A @ 20%
  ****Upgrade to 4mm2 lead and 20A plug to achieve 30% @ 60A Duty Cycle.
• Warranty: 3 Year Limited Warranty Refer to operating manual for details
• Power Supply: 15Amp, 240Volt AC (Output 60A@20%) 20A, 240Volt AC (Output A@30%) Minimum circuit breaker 25Amps)
• Material: Mild Steel, Stainless Steel, Aluminum
• Usage: Light fabrication, sheetmetal, marine and onsite repairs
• Welding Process: Plasma Cutting & Gouging
• Australian Standards: AS 60974.1-2006.
• Supply Plug Lead: 15Amp* fitted plug *Minimum recommended circuit breaker 25A.
  **Upgrade to 4mm2 lead and 20A plug to achieve 30% @ 60A Duty Cycle.
• Cutting Capacity: TRUE CUT – 20mm Mild Steel, 14mm Stainless Steel, 12mm Aluminum Severence Cut – Up to 28mm
• Protection Class: IP23S
• Cooling: Fan Cooled
• Dimensions Power Source: 324H x 176W x 437D in mm
• Maximum Output Range: 20 – 60Amps
• Nominal Supply Frequency: 50/60 Hz

Includes:

• Plasma Power Source – CutSkill 60
• CutSkill 60A Plasma Torch with 1.1mm Cutting / Gouging Tips
• Work Cable and Clamp
• Wrench for Air Filter
• 1 x ¼” Nitto Air Line Connector
• Shoulder Strap
• Operating Manual (Power Source and Plasma Torch)