Panasonic EY79A2X57 14.4V & 18V Dual Voltage Brushless Cordless Hammer Drill Driver (Skin Only)

High power drillling with extreme durability in masonry, wood and metal. Featuring a new brushless motor, possible to use with dual voltage, 13mm heavy duty keyless chuck and a hybrid switch.

Features:

• Extreme Durability
• New Brushless Motor
• New Ultra Hard Chuck Jaw Tips
• New Hybrid Switch
• Powerful to Finish
• Increased Efficiency and Flexibility
• Tough Tools for Tough Conditions
• IP56 Rated - Dust and Water Resistant
• Performance Protection
• Switch- addditional rubber cap seals the switch and protects it against dust and water.
• Electronics- electronic circuits of control panel and battery pack are covered by an Urethran layer for maximum dust and water protection.
• Battery- battery cells are designed to avoid intrusion of moisture
• Dual Voltage for Better Versatility
• Battery Capacity- powerful and longer lasting
• Optimum rotation speed control
• Variable speed control / reversible
• LED light to support work
• Electric brake

Specifications:

• Max. Torque
• Stalling Torque
• High/Hard Mode 14.4V : 10Nm / 18V : 12Nm
• Low/Soft Mode 14.4V : 28Nm / 18V : 32Nm
• Instant Torque Low/Soft Mode 14.4V : 40Nm / 18V : 50N
• Speed at No Load
• High/Hard Mode: 14.4V : 70-1350rpm / 18V : 70-1580rpm
• Low/Soft Mode: 14.4V : 30-400rpm / 18V : 30-470rpm
• Blows Rate per Minute
• High/Hard Mode: 14.4V : 1260-24300bpm / 18V : 1260-28400bpm
• Low/Soft Mode: 14.4V : 540-7200bpm / 18V : 540-8500bpm
• Clutch Torque: 1.0-4.4Nm
• Max.Drill Diameter
• Low/Soft Mode: In Wood - 14.4V : dia.35mm / 18V : dia.38mm
• Low/Soft Mode: In Metal - 14.4V : dia.13mm / 18V : dia.13mm
• Max.Screws Driving
• Low/Soft Mode: In Wood screw - 14.4V : dia.6.8mm / 18V : dia.8mm
• Low/Soft Mode: In Self-drilling screw - 14.4V : dia.6mm / 18V : dia.6mm
• Battery Pack and Charging time (using EY0L82B)
• LJ2G: 18V / 5.0Ah (EY9L54B)
• Usable:65min. / Full:80min.
• PN2G: 18V / 3.0Ah (EY9L53B)
• Usable:45min. / Full:60min.
• LS2F: 14.4V / 4.2Ah (EY9L45B)
• Usable:50min. / Full:60min.
• Capacity
• LJ2G
• Screwing
• Wood Screws in Yellow pine – High Mode: dia.4.1mm x 25mm; 1750pcs
• Wood Screws in Yellow pine – Low Mode: dia.8mm x 80mm; 430pcs
• Self-Driling Screws in SPC – High Mode: dia.4mm x 13mm, t=1.6mm; 1250pcs
• Drilling
• Holes in Plaster Board + Plywood (Wooding core) – High Mode dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) 60pcs
• Holes in SPC (Hole Saw) – High Mode dia.21mm, t=1.6mm 50pcs
• Holes in SPC (Hole Saw) – Low Mode dia.33mm, t=1.6mm 75pcs
• Holes in Yellow Pine – High Mode dia.18mm x 120mm 140pcs
• Holes in Yellow Pine – Low Mode dia.30mm x 40mm 280pcs
• Holes in Mortar – High Mode dia.6.5mm x 30mm 220pcs
• Holes in Mortar – High Mode dia.10mm x 30mm 160pcs
• Holes in Masonry – High Mode dia.5mm x 40mm depth 260pcs
• PN2G
• Screwing
• Wood Screws in Yellow pine – High Mode: dia.4.1mm x 25mm; 1050pcs
• Wood Screws in Yellow pine – Low Mode: dia.8mm x 80mm; 260pcs
• Self-Driling Screws in SPC – High Mode: dia.4mm x 13mm, t=1.6mm; 740pcs
• Drilling
• Holes in Plaster Board + Plywood (Wooding core) – High Mode: dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm); 35pcs
• Holes in SPC (Hole Saw) – High Mode: dia.21mm, t=1.6mm; 30pcs
• Holes in SPC (Hole Saw) – Low Mode: dia.33mm, t=1.6mm; 45pcs
• Holes in Yellow Pine – High Mode: dia.18mm x 120mm; 80pcs
• Holes in Yellow Pine – Low Mode: dia.30mm x 40mm; 170pcs
• Holes in Mortar – High Mode: dia.6.5mm x 30mm; 130pcs
• Holes in Mortar – High Mode: dia.10mm x 30mm; 100pcs
• Holes in Masonry – High Mode: dia.5mm x 40mm depth; 150pcs
• LS2F
• Screwing
• Wood Screws in Yellow pine – High Mode: dia.4.1mm x 25mm 1600pcs
• Wood Screws in Yellow pine – Low Mode: dia.8mm x 80mm 300pcs
• Self-Driling Screws in SPC – High Mode: dia.4mm x 13mm, t=1.6mm 830pcs
• Drilling
• Holes in Plaster Board + Plywood (Wooding core) – High Mode: dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) -
• Holes in SPC (Hole Saw) – High Mode: dia.21mm, t=1.6mm; 35pcs
• Holes in SPC (Hole Saw) – Low Mode: dia.33mm, t=1.6mm; 50pcs
• Holes in Yellow Pine – High Mode: dia.18mm x 120mm; 110pcs
• Holes in Yellow Pine – Low Mode: dia.30mm x 40mm; 180pcs
• Holes in Mortar – High Mode: dia.6.5mm x 30mm; 130pcs
• Holes in Mortar – High Mode: dia.10mm x 30mm; 110pcs
• Holes in Masonry – High Mode: dia.5mm x 40mm depth; 200pcs

• Size (LxHxW) / Weight (including battery pack)
• LJ2G: 188mm x 250mm x 68mm / 2.10kg
• PN2G: 188mm x 234mm x 68mm / 1.85kg
• LS2F: 188mm x 242mm x 68mm / 1.95kg