Fluke FLUKE-289 True-RMS TrendCapture Data Logging Multimeter

by Fluke
FREE Shipping over $99*
Exclusions apply – See Shipping Policy
$1,394.00

Buy Now. Pay Later

Estimated Dispatch Time: 3-10 days
i

Contact us for an exact ETA. Subject to availability - T/C's apply

Features:

  • TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
  • Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
  • Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
  • Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
  • LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
  • Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
  • Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
  • Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
  • Save multiple logging sessions before PC download is necessary.
  • Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
  • On board help screens for measurement functions. Unsure about a function - go to that function and press the "i" button.
  • Real time clock for automatic time stamping of saved readings.
  • Relative mode to remove test lead resistance from low ohms or capacitance measurements.
  • True-RMS AC voltage and current for accurate measurements on non-linear signals.
  • Measure up to 10 A (20 A for 30 seconds).
  • 100 mF capacitance range.
  • Peak capture to record transients as fast as 250 μs.
  • Premium test leads and alligator clips included.
  • Amp jack plugs included.
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
  • FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
  • Limited lifetime warranty.

Specifications:

  • DC volts
    • Range / resolution: 50.000 mV, 500.00 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0 V
    • Basic accuracy: 0.025%
  • AC volts
    • Range / resolution: 50.000 mV, 500.00 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0 V
    • Basic accuracy: 0.4% (True-RMS)
  • DC current
    • Range / resolution: 500.00 μA, 5000.0 μA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 A
    • Basic accuracy: 0.05%
  • AC current
    • Range / resolution: 500.00 μA, 5000.0 μA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 A
    • Basic accuracy: 0.6% (True-RMS)
  • Temperature (excluding probe)
    • Range / resolution: -200.0°C to 1350.0°C (-328.0°F to 2462.0°F)
    • Basic accuracy: 1.0%
  • Resistance
    • Range / resolution: 50.000 Ω, 500.00 Ω, 5.0000 kΩ, 50.000 kΩ, 500.00 kΩ, 5.0000 MΩ, 50.00 MΩ, 500.0 MΩ
    • Basic accuracy: 0.05%
  • Capacitance
    • Range / resolution: 1.000 nF,10.00 nF 100.0 nF, 1.000 μF, 10.00 μF, 100.0 μF, 1000 μF, 10.00 mF, 100 mF
    • Basic accuracy: 1.0%
  • Frequency
    • Range / resolution: 99.999 Hz, 999.99 Hz, 9.9999 kHz, 99.999 kHz, 999.99 kHz
    • Basic accuracy: 0.005%
  • Connectivity: Optional infrared connector via Fluke ir3000 FC
  • Maximum voltage: between any terminal and earth ground 1000 V
  • Battery type: 6 AA alkaline batteries, NEDA 15A IECLR6
  • Battery life: 100 hours minimum, 200 hours in logging mode
  • Temperature
    • Operating: -20°C to 55°C
    • Storage: -40°C to 60°C
  • Relative humidity: 0 to 90% (0 to 37°C), 0 to 65% (37°C to 45°C), 0 to 45% (45°C to 55°C)
  • Electromagnetic compatibility: EMC EN61326–1
  • Vibration: Random vibration per MIL-PRF-28800F Class 2
  • Shock: 1 meter drop per IEC/EN 61010–1 3rd Edition
  • Size (H x W x L): 22.2 x 10.2 x 6 cm (8.75 x 4.03 x 2.38 in)
  • Weight: 870.9 g (28 oz)
  • Multiple on screen displays: Yes
  • True-RMS AC bandwidth: 100 kHz
  • dBV/dBm: Yes
  • DC mV resolution: 1 μV
  • Megohm range: Up to 500 MΩ
  • Conductance: 50.00 nS
  • Continuity beeper: Yes
  • Battery/fuse access: Yes/Yes
  • Elapse time clock: Yes
  • Time of day clock: Yes
  • Min-max-avg: Yes
  • Duty cycle: Yes
  • Pulse width: Yes
  • Isolated optical interface: Yes
  • Auto/touch hold: Yes
  • Reading memory: Yes
  • Log to PC: Yes
  • Interval/event logging: Yes
  • Logging memory: Up to 15,000 readings
  • Wireless connectivity (optional): Yes

Includes:

  • 289 True-RMS Industrial Logging Multimeter
  • TL71 Test Leads
  • AC175 Alligator Clips
  • Batteries – 6 AA Installed

Subscribe to our newsletter for all the latest deals!